Audison subwoofers – product range

APBMW S8-2.2

audi_admin — Thu, 07 Apr 2022 14:21:48 +0000

The 200 mm (8 in.) APBMW S subwoofers allow a direct replacement of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. The Neodymium magnet allows for greater power and control than ferrite while maintaining the depth of installation unaltered.

The post APBMW S8-2.2 first appeared on Audison - Car Audio Amplifiers, Speakers, Processors.

APBMW S8-4.2

audi_admin — Thu, 07 Apr 2022 14:20:18 +0000

The post APBMW S8-4.2 first appeared on Audison - Car Audio Amplifiers, Speakers, Processors.

APS 8 D

audi_admin — Thu, 02 Dec 2021 10:02:34 +0000

The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

The post APS 8 D first appeared on Audison - Car Audio Amplifiers, Speakers, Processors.

APS 10 D

audi_admin — Thu, 02 Dec 2021 10:02:34 +0000

The APS 10 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice-coil and single voice coil versions feature push connectors for ease of wiring and configurations. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

The post APS 10 D first appeared on Audison - Car Audio Amplifiers, Speakers, Processors.

APS 8 R

audi_admin — Thu, 02 Dec 2021 10:02:34 +0000

With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AF C8.14 bit or AF C4.10 bit / AF C4D / AF M4D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

The post APS 8 R first appeared on Audison - Car Audio Amplifiers, Speakers, Processors.

APS 10 S4S

audi_admin — Thu, 02 Dec 2021 10:02:34 +0000

Prima compact subwoofer family expands with the introduction of the new 25 cm (10 in.) APS 10 S4S, optimized for enclosures with a reduced volume starting from 10 liters. The configuration of the single 4 ohm voice coil makes it ideal to be driven by the new AP F8.9 bit amplifier with built-in DSP that delivers an outstanding 260 W RMS with two channels bridged. Also interesting is the possibility to create custom enclosures with two APS 10 S4S driven by the AF M1D amplifier using the 540 W RMS delivered on the 2 ohm load resulting from the drivers connection in parallel.

The post APS 10 S4S first appeared on Audison - Car Audio Amplifiers, Speakers, Processors.