DSP Amps
Amplifiers
Processors
Speakers
Subwoofers
Subwoofer Box
Accessories
Merchandising
Back
Home | Speakers | Prima | AP 6.5 Ohm2

AP 6.5 Ohm2 Woofer | 210 W Peak Power | 165 mm | 2 ohm

AP 6.5 ohm2 woofer has been developed with 2 ohm nominal impedance with the purpose of exploiting all the power made available by the AP8.9 bit amplifier capable of 65W into a 2 ohm load. To maximize the woofer efficiency achieving 95 dB, a 25 mm diameter 10 mm winding height coil, so a more lightweight coil, has been employed, at the same time also providing a linear excursion 2.8 mm higher than the one of AP 6.5 (4 ohm), therefore ensuring high SPL values with minimum distortion even at high listening levels. To extend the woofer's frequency range down to low frequencies up to 50 Hz a 75 Hz resonance frequency has been chosen, achieving excellent low frequency output even without the use of a subwoofer.

Technical Specs

Nominal diameter 165 mm (6.5 in)
Impedance 2 Ohm
Power Handling - Peak 210 W
Power Handling - Continuous 70 W
Sensitivity 95 dB
Frequency Response 60 ÷ 5k Hz
Voice Coil Ø 25 mm
Magnet size D x d x h 85 x 32 x 15 mm (in.)
Xmax 2.8 mm (0.11 in)
Driver Displacement Volume 95 l (3.355 ft)

Electric-acoustic Specs

Re 2.1 Ohm
Fs 75 Hz
Le 0.15 mH
Vas 8.5 l (0.3 ft)
Mms 10.5 g (0.37 oz)
Cms 0.4 mm/N
BL 3.8 T•m
Qts 0.63
Qes 0,73
Qms 4.8

General

Weight 0.78 kg

Dimensions

AP 6.5 Ohm2
Dimension A 165 mm (6.5 in)
Dimension B 141 mm (5.55 in)
Dimension C 77.3 mm (3.04 in)
Dimension D 58.5 mm (2.3 in)

Accessories

APG 6.5
APG 6.5
Pair of 165mm speaker protective grilles, compatible with all 130mm woofers and coaxial, ideal for Audison AP 6.5.
Read more

Features

  • 2 impedance, to fully exploit the 65 W power per channel at 2 of the AP8.9 bit amplifier.
  • 75 Hz resonance frequency, to extend the frequency range down
    to low frequencies up to 50 Hz and increase the SPL in the low range.
  • 25 mm mobile voice coil to maximize efficiency achieving 95 dB.
  • 10 mm winding height mobile voice coil to increase maximum
    linear excursion up to 2,8 mm and minimize distortion, even at
    high listening levels.
  • Water-repellent treated paper cone, featuring profile developed
    with FEM simulation technology and optimized with the Klippel
    Scan Vibrometer.
  • Reduced mounting depth, providing ease of installation in OEM
    placements.
  • TPU (Thermoplastic Polyurethane) surround, featuring the exclusive “Triple Wave” shallow profile, for maximum excursion linearity.
  • Compact basket, protected by abrasion-resistant and scratch-proof
    coating. Damping epoxy glue provides perfect coupling with the
    motor system.
  • High current fast-on terminal with double contact on positive and
    negative poles for high flexibility and quick connection. The terminal
    features a temperature resistant plastic cover, protecting it against
    accidental short circuits.
  • Developed with the KLIPPEL suite.

Subscribe to Audison
newsletter

Panoramica privacy

Diese Website verwendet Cookies, damit wir dir die bestmögliche Benutzererfahrung bieten können. Cookie-Informationen werden in deinem Browser gespeichert und führen Funktionen aus, wie das Wiedererkennen von dir, wenn du auf unsere Website zurückkehrst, und hilft unserem Team zu verstehen, welche Abschnitte der Website für dich am interessantesten und nützlichsten sind.