AF M6D Amplifier | 1320 W total power | 6 x 220 W @ 2ohm | D-class Fully Bridgeable
*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.
Amplifier Tech Data
| Channels | 6 |
| Class | D-Class |
| Efficiency | 81 % |
| Hi Level Input | Yes |
| Low Level Input | Yes |
| Digital Input | No |
| Power supply voltage / fuse | 11 ÷ 15 VDC |
| Operating power supply voltage | 6.5 ÷ 17.5 VDC |
| Idling current | 1 A |
| Idling current when off | 0.009 mA |
| Consumption @ 14.4 VDC, 2Ω, Max Musical Power | 60 A |
| Remote OUT | 6.5 ÷15 VDC (150 mA) |
| Remote IN | 4 ÷15 VDC (1 mA) |
| ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) | 1.5 VDC |
Amplifier Stage
| Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power | 0.04% |
| Bandwidth A | (-3 dB, 2 VRMS, 4 Ω): 10 Hz ÷ 42 kHz |
| S/N ratio A | (A weighted @ 1 V): 103 dBA |
| Damping factor A | (100 Hz, 4Ω, 2 VRMS): 160 |
| Input sensitivity Pre-In | 0.6 ÷ 6 VRMS |
| Input sensitivity Speaker-In | 2.2 ÷ 22 VRMS |
| Total Power RMS | 1320 W |
| Minimum load impedance |
6 Ch 2Ω 3 Ch - (Bridge) 4Ω |
| Output Power (RMS) @14.4 VDC, 1% THD |
6 Ch @ 4Ω: 135 W x 6 6 Ch @ 2Ω: 220 W x 6 3Ch (Bridge 1/2; 3/4; 5/6) @ 4Ω: 440 W x 3 |
| Adjustable Crossover | No |
CEA Specifications
| Output power @ 4Ω, 1% THD+N, 14.4 V | 130 W x 6 |
| SN ratio (ref. 1W output) | 80 |
Inputs
| Input Type | Pre-In / Speaker-In |
| Remote Sub Volume | ±12 dB |
Other
| Fuse | 2 x 35A |
| Weight | 1.95 kg |
Dimensions
|
|
| Dimension A | 240 mm |
| Dimension B | 156 mm |
| Dimension C | 47 mm |
Box Content
Provided cable with six pairs of labeled cables to connect the speakers to the AF M6D.
Provided in pair. Two stereo RCAs interconnection to connect Forza bit amplifier with after-market sources with PRE-OUT outputs provided with Forza amplifiers.
Accessories
The Audison AF Link is an accessory cable to connect the DSP OUT outputs of the Audison AF bit amplifiers (amplifiers with integrated DSP) to the PRE IN inputs of the Audison AF D amplifiers.
Look at all the connection examples in the Owner’s manual !
The Audison AFM CLK accessory is specifically engineered for the Audison Forza Max amplifier line. This accessory kit comprises a metal bracket equipped with air flow slots and a cooling fan, which can be securely mounted onto the Audison Forza Max amplifiers.
Key Features:
• Durable Metal Bracket: The sturdy metal bracket ensures reliable support and optimal airflow through strategically placed slots.
• Efficient Cooling Fan: The cooling fan is equipped with a temperature sensor, allowing it to activate only when the amplifier requires additional cooling. This ensures efficient operation and prolongs the lifespan of the amplifier by preventing overheating.
• Temperature Sensor: The intelligent temperature sensor continuously monitors the amplifier’s temperature, activating the cooling fan only when necessary, providing efficient and effective cooling precisely when needed.
The Audison AFM CLK accessory is highly recommended when the amplifier is installed in very tight spaces with limited air circulation, ensuring optimal performance and longevity under challenging conditions.
Features
- Improved audio performance and power thanks to the latest generation of ADT (Audison D-Class) technology
- Unbeatable power/volume ratio up to 0.68 W RMS/cm³ reaching 81% of efficiency
- Hi-Res compatibility performance, with an extended audio band up to 40 kHz
- Maximum versatility thanks to the possibility of using the bridging option for each pair of power outputs
Technologies
ADT uses a switching frequency twice as fast as many other modern Class D amplifiers using very high-tolerance component parts to keep the timing correct even during temperature extremes. The higher switching frequency of Audison Class D moves noise much farther away from the audible band. Audison Class D amplifiers also use a steeper 4th-order analog lowpass filter, rather than the simpler 2nd-order lowpass filters usually used in competing designs. The steeper filter will keep noise much lower in amplitude – which is good for controlling EMI and preventing infrasonic noise from getting to the tweeters. It also keeps phase shift outside the audible range. The cost is higher – twice as many components are needed for a 4th-order filter compared to the usual 2nd-order filter, and each output channel needs its own filter – but Audison determined through exhaustive listening testing that this design was the best-sounding approach.
The “All Channels Driven” design philosophy guarantees that the Audison amplifier delivers the rated power on all channels simultaneously. To reach that target, Audison designed the amplifier power supply to handle the cumulative power demand.
Maximum versatility thanks to the bridging option for each pair of channels.
According to the definition of Hi-Res audio provided by JAS (Japan Audio Society), this amplifier exceeds the above 40 kHz bandwith analog requirement.
Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source.
Docs
Related Products
English 
Italiano 
Français 
Deutsch 
Español 
简体中文